TCRM Palan pneumatique ergonomique

Le maître manipulateur.

Imaginez un palan TCR, mais avec une opération à une main. & nbsp; & nbsp; C'est ce que propose le TCRM - toutes les fonctionnalités d'un TCR & nbsp; plus le contrôle du manipulateur, offrant un contrôle fin de la mise en drapeau d'une seule main. Ce palan peut fonctionner pendant de longues périodes de temps tout en offrant des démarrages et des arrêts en douceur, et un placement de presicion pour les applications plus difficiles. & Nbsp;

Manipulator Control

The ergonomic, in-line handgrip control allows for single-handed operation, which gives the operator a free hand to safely guide and position the load.

Ergonomic In-Line Hand-grip and push buttons

Easy-Touch buttons for fine feathering control. Push pressure determines speed of lift and lowering of the load. Simply grab the handle while pressing on one of the adjacent buttons with your thumb.


The TCR air hoist is built for long and demanding work shifts. With its unlimited duty cycle, you can continually operate the hoist without worrying about damage from too many starts per hour.


Protect the hoist and operator while avoiding downtime. The TCR’s adjustable, built-in load limiter is pre-set to stop lifting when the load capacity is over-rated, which keeps your job site safer.

Six foot lift

With a 1/4 tonne capacity this hoist has a standard lift of 6 feet.

CAPACITY&frac14STANDARDSEnvironmental Protection: IP55 environmental protection, 80.5 dBA at 1 metreOperating Conditions: Recommended for-10 to +60° Celsius Oil filter and lubricator comes standard in the boxOPTIONSChain bag to keep chain clean and out of the wayCustom lift lengths to suit your requirementsPlain, geared or air trolley mountBODYHigh-strength cast iron housing for proven weather resistance and durability in harsh environmentsCompact and low profile headroom GEARSPlanetary gear boxLOAD CHAINUltra-strong high performance nickel-plated load chainGrade 80HOOKSForged carbon steel opens gradually without fracturing under excessive loads. Bottom and top hooks swivel 360 degreesSelf-closing top and bottom hooks with heavy-duty hook latchOPERATIONManipulator control with 6 foot liftProvides outstanding control for fine feathering movements using a spring-loaded multi-vane motor designBRAKEHeavy-duty, self-adjusting brakeMOTORAir Supply: 60 to 90 psiAir-powered, spring-loaded multi-vaneSpeed Control: Full range variable speed controlMinimum 10 to 15 drops of oil per minute from a max distance of 15 feet Maximum 5-micron air filter or finer requiredUnlimited duty cycle
Choisissez la configuration du produit ci-dessous pour afficher les informations:

Cliquez pour agrandir

*For informational purposes only, contact KITO for dimensional drawing


Capacité Modèle C a b d e g h i j k
¼ TCR250M 305 287 102 112 175 23 71 33 18 102

* All measurements in millimeters (mm)


Capacité Modèle Levage standard (pi) Push Button Hose L (ft) Up/Down Speeds (90 psi - ft/min) Up/Down Air Consumption Rates (cubic ft/min @ 90 psi) Load Chain Diameter (mm) X Chain Fall Lines Net Weight lbs Weight for additional 5 ft of Lift
avec charge sans charge With full load w/o full load
¼ TCR250M 6 6 26/54 55/41 28/28 32/25 4 X 1 24 --